Reali-Slim TT turntable thin section bearings

Reali-Slim TT turntable thin section bearings have inner and outer ring raceway designs that enable them to accommodate radial, axial and moment loads simultaneously. They are based on a sealed four-point contact ball bearing and are available in three different designs:

bearings without a gear
bearings with an external (outer ring) gear
bearings with an internal (inner ring) gear

SKF standard Reali-Slim TT turntable thin section bearings are made of stainless steel. The bearings can be customized to meet specific application needs.​

BB series metric thin section ball bearings:

BB series metric thin section ball bearings are based on a four-point contact ball bearing. They are designed to match the bores and widths of common cross-roller bearings. With additional features not commonly available in standard cross-roller bearings, BB series bearings provide beneficial design flexibility. The bearings can be further customized to meet specific application needs.​

KT series thin section tapered roller bearings:

KT series thin section tapered roller bearings are designed primarily for radial load applications. Since these bearings have a contact angle of approximately 12° under axial load, they can accommodate a reasonable amount of axial load.
Tapered roller bearings feature a cup and cone assembly. The cup is comprised of the outer ring and the cone assembly consists of an inner ring, rollers and a cage. The projection lines of the raceways meet at a common point on the bearing axis defined by the contact angle α to provide a true rolling action and therefore low frictional moments during operation.KT series tapered roller bearings can be customized to meet specific application needs.