Split cylindrical roller bearings are special bearings designed especially for heavy industries. Due to the nature of their construction, they are designed mainly for the transmission of radial loads. The undeniable advantage of split bearings is the possibility of mounting where standard bearings would not be possible to be mounted or would be very difficult to mount. Compared to conventional bearings, these split bearings have a wider inner ring which allows the split bearing to be mounted on the shaft.
Split Bearings such as Cooper Bearings and Timken Split Roller Bearings can be an important asset to your operation. Split bearings can significantly decrease downtime by eliminating the need to move equipment when changing a bearing. The spit bearing is also easier to install, maintain and replace and therefore offera a real opportunity to cut operational costs, increase safety and free up valuable resources for other tasks.
Timken® Split Cylindrical Roller Bearing Housed Units maximize uptime. They are easy to install and quick to maintain. When replacing trapped solid SN/SD/SAF housings, a split unit can reduce installation time up to 90%.
The split-to-shaft feature makes installation and maintenance simple and fast. The SNQ / SAFQ pedestal type can further reduce downtime dramatically. It slides under the shaft eliminating the need to lift it and remove a drive to install a bearing.
At home in a wide range of operating conditions, the 01 Light, 02 Medium and 03 Heavy Series handle increasingly higher static and dynamic loads. Pedestal, flange, hanger and tensioning support types are available.
Catalog shaft size range: 35 mm to 600 mm, with custom units from 600 mm shaft size to 1500 mm O/D. Ductile iron and steel supports are an option for severe duty applications.
Cooper offers four standard bearings series to accommodate a variety of shaft sizes:
100 Series
For certain bore sizes in the range 75mm to 150mm Cooper also offer the 100 Series. Lighter duty than the 01 series, it is more compact and capable of higher operating speeds.
01/01E Series
The most commonly used, 01 / 01E series are intended for medium duty applications with a wide range of speeds. 01E series are available in 45mm to 105mm size range, and 160mm to 300mm size range, and offer enhanced load carrying capabilities, and can be considered for applications where 02 series were previously considered.
02/02E Series
The 02 Series offers a more rugged bearing solution for demanding applications where the 01 Series may not be suitable. The 02 Series also operates over a wide range of speeds. For a given shaft size, the 02 Series offers more radial and axial capacity than the 01 Series.02E series are available in 160mm to 300mm size range, and with enhanced load carrying capabilities, they can be considered for applications where 03 series were previously considered.
03 Series
Designed for extreme loading conditions the 03 Series tops the capacity of the 02 Series and offers the highest load ratings of all standard series.
The following are some of the split bearings that Keller provides you with in stock. For more information, please visit Keller bearings.
01BCTT40M 02BCRET50M 02B503GR 03B130MGR 02BCP320M 04B3000GR
01EBCTT45M 02BCRET60M 02B507GR 03B140MGR 02BCP340M 04B3200GR
01EBCTT50M 02BCRET65M 02B508GR 03B150MGR 02BCP360M 04B3300GR
01EBCTT60M 02BCRET70M 02B515GR 03B160MGR 02BCP607 04B3600GR
01EBCTT65M 02BCRET75M 02B600GR 03B170MGR 02BCP608 04B1060MGR
